Recycled Rubber Threshold Ramps 4.5" to 8" (114mm–203mm) High – 400mm Wide, 1:6 Gradient, 1000kg

Taller rubber threshold ramps for safe access over steps and kerbs, available in heights from 4.5" (114mm) to 8" (203mm). Made from 100% recycled rubber and built to a smooth 1:6 gradient, they give mobility aids a gentle slope and help reduce trip hazards, indoors or outdoors.

• 1000kg capacity – suitable for wheelchairs, mobility scooters and walkers, and strong enough for pedestrians, pets, light cars, motorbikes and ride-on mowers over steps, driveways and kerbs.
• Built to a 1:6 gradient.
• Full-width anti-slip surface for optimum grip.
• Rest and go – no installation or fixings needed; just rest it against the step or kerb and start using it.
• Straight-edge design – place several ramps side by side to cover wider entrances such as double doors.
• Each ramp is 400mm wide; lengths range from 685.8mm to 1219mm and weights from 10.5kg to 31kg per ramp, depending on height.
• Made from 100% recycled rubber compound (may contain trace amounts of metal); low-maintenance and can be left outside.
• Two-year warranty.

• For wheelchairs and mobility scooters a pair is recommended, as each ramp is 400mm wide.
• These ramps are heavy, so they are usually left in place.
• Can be trimmed to width with a saw or knife if wider than your doorway.
• uPVC doorways: many have a protruding ledge, so a rubber ramp on its own may sit in front of the ledge and leave a gap up to the threshold. Often the best solution is a rubber ramp on the inside (if the floor is flat) with a folding wheelchair ramp or similar on the outside, giving a smooth, continuous transition; different heights inside and out may need another solution.
• 203mm is the tallest height available in this range.
• The natural rubber smell fades after a couple of days in fresh air; wiping the surface with a damp cloth and washing-up liquid speeds this up.
• Images are for illustration only; the actual product may vary slightly due to product improvements.