Folding Aluminium Ramp & Rubber Threshold Ramp Drive-In Kit – 2ft to 8ft Long, 4.5in to 7in High

A portable up-and-over kit that pairs a budget-friendly folding aluminium wheelchair ramp (2ft to 8ft long) with a pair of rubber threshold ramps (4.5in to 7in / 114.3mm to 177.8mm high). It is made for awkward doors such as uPVC, and for doorways where the floor height differs on each side. Because nothing is fixed permanently, it supports independence and suits people who move home or travel often. Ideal at home, in shops and in workplaces.

• The folding ramp can climb several steps outside, while the higher rubber ramps deal with taller steps and thresholds.
• To protect the doorframe from the weight of a wheelchair or scooter, choose a rubber ramp slightly higher than your threshold, so the folding ramp rests on the rubber ramps and bypasses the frame. Or place the rubber ramps inside and the folding ramp outside.
• You can also rest the folding ramp straight onto your threshold.
• No installation: just rest the ramps in position and start using them.
• The rubber ramps can usually stay in place, but the folding ramp has to be moved to close the door. For a set-up that can stay in place, see our adjustable threshold ramp with entry plate kit.

• Folds like a book for easy storage and transport, with a built-in carry handle.
• Lightweight, from 4.2kg depending on length, so it can be lifted into place when needed.
• Curved rest-on connection (70mm long) with rubber for extra grip between the step and the ramp.
• The curved design gives a smooth ride on and off the ramp.
• 30mm high safety edges help stop users rolling off.
• Anti-slip aluminium surface for extra grip.
• 720mm wide, with a usable width of 715mm.
• 2ft to 6ft ramps have a flat hinge; 7ft and 8ft ramps have a barrel hinge and a steeper entry onto the ramp.
• Independently tested to a capacity of 275kg to 300kg, suitable for wheelchairs, electric wheelchairs, mobility scooters and walkers.
• A carry bag is available for the 2ft to 5ft ramps.

• Supplied as a pair; each ramp is 400mm wide, giving a total width of 800mm.
• Supports loads of up to 1000kg.
• Made from a 100% recycled rubber compound.
• Rest and go: slide them up to the kerb or threshold and start using them.
• Can be extended to any length you need.
• The width can be cut down with a knife or saw. Changing the length is not recommended because it alters the gradient.
• Weatherproof with a full-width anti-slip surface; they can be left in place like a doormat. The higher ramps are heavy, so they are usually left in place.

• For lower thresholds, see our lower drive-in kit with rubber ramps up to 100mm high.
• Rubber ramps in this range go up to 203mm (8in) high.
• One-year warranty.
• Pictures are for illustration only; the actual product may vary due to product improvements.