Two-Piece Multi-Fold Car Boot Ramp for Wheelchairs & Scooters – 6ft to 9ft L x 740mm W, 250kg to 350kg
Not sure which length you need?
Send us the step height and who will use it — we'll confirm the right ramp before you order.
Overview
A premium multi-fold access ramp that lets you load a manual wheelchair, electric wheelchair or mobility scooter into your car. It is dual-purpose, so occupied mobility aids can also use it to get over steps, kerbs and doorways. The ramp comes in two halves, keeping each piece light and easy to store in the car boot. Choose from 6ft, 7ft, 8ft and 9ft lengths, with capacities up to 350kg. Made in Britain.
Specifications
| Length Options | 6ft L x 740mm W (732mm Internal W) |
|---|---|
| Internal Width (mm) | 732 |
| Length (ft) | 6 - 9 |
| Open Width (mm) | 740 |
| Total Width (mm) | 740 |
| Capacity (kg) | 250 - 350 |
| Max Load Height (mm) | 300 - 450 |
| Weight (kg) | 7.8 - 21.8 |
| Two Year Warranty | Yes |
| Easy to Fit | Yes |
| Electric Wheelchair | Yes |
| Manual Wheelchair | Yes |
| Mobility Scooter Friendly | Yes |
Features
- Splits into two halves, and each half folds to half its length for easy carrying and storage.
- The two halves lock together in use: place them side by side and slide them together so the hooks lock securely.
- Flat hinge suits all mobility aids, including 3-wheeled scooters.
- Full-width anti-slip surface with a unique grip design, plus safety edges to stop mobility aids coming off the ramp.
- Anti-slip grit surface on the rest-on connection keeps the ramp in place.
- Contrasting colour edge strip makes the ramp easy to see for people with limited vision and passers-by, reducing trip hazards.
- Robust safety hinges with pinch protection.
- Centre-mounted carry handle, and the ramp clips securely shut when stored so it cannot open in the car boot.
- Professional, high-quality finish for domestic and commercial settings such as shops, businesses, offices, community spaces and events.
- CE marked, with a two-year warranty.
- Suitable only for use as a mobility aid.
How to Use
Quick to set up with no installation: unfold the ramps, connect the two halves, rest them on the step, kerb, doorway or car boot and start using. Use it to load empty mobility aids into a car, or to give users access over steps and kerbs.
Choosing Your Length
- Measure the vertical height from the ground to where the ramp will rest on your car boot. This is your load height; the maximum load height for the range is shown in the table below.
- The recommended load height for loading unoccupied wheelchairs and scooters is based on a 1:33 gradient. Check your scooter's manual to make sure this gradient is suitable.
- If you need a permanently fitted ramp, a fixed folding van ramp is a better choice.
- Pictures are for illustration only; the actual product may vary due to product improvements.
Ramp length checker
Measure from the ground to the top of the step or threshold.
