Recycled Rubber Threshold Ramps – 25mm to 100mm (1" to 4") High, 1000kg Capacity

Rubber threshold ramps for safely getting over steps, doorways, kerbs and thresholds, available in heights from 1 inch (25.4mm) up to 4 inches (101.6mm). Made from 100% recycled rubber with a smooth gradient designed for disabled access, they give mobility aids a safe route and reduce trip hazards at home, in gardens, businesses, shops and the workplace. Use them indoors or outdoors.

• 1000kg capacity, suitable for manual and electric wheelchairs, mobility scooters, walkers and pedestrians.
• Rest and go: no installation or fixings needed. The ramp's own weight holds it in place; simply rest it against the step or kerb.
• Full-width anti-slip surface for maximum grip.
• Bevelled, sloped edges help reduce trip hazards.
• Weatherproof and low maintenance: leave it outside in place or move it whenever needed.
• Two-year warranty.

• Height options: 1", 1.5", 2", 2.5", 3", 3.5" and 4" (25.4mm to 101.6mm).
• Sold individually, in pieces 900mm or 1105mm wide depending on the height chosen; the width includes the sloped edges.
• Length ranges from 210mm to 635mm and weight from 4.2kg to 23.6kg, depending on height. The taller heights are quite heavy, so they are generally left in place.
• Taller heights are also available in the wider range.

• Measure the vertical height of the step, kerb or doorway and choose the closest height.
• If the door opens over the ramp, a ramp slightly lower than the step lets the door still open with the ramp left in place.
• Used together with a folding wheelchair ramp, choose a ramp slightly higher than the doorway so you can bridge the threshold safely.
• Trim to width with a Stanley knife or saw for narrower doorways or to fit around skirting boards. Pieces can also be cut and placed side by side for a wider ramp, for example across double doors. The ramps are not otherwise customised.
• No fixings are needed, but you can secure the ramp to the floor with rubber adhesive if you wish.
• Many uPVC doors have a protruding ledge, so a rubber ramp outside may sit in front of it and leave a gap. A rubber ramp indoors (if the floor is flat) with a folding ramp or similar outside often works best; different heights inside and out may need another solution.
• The imperial (inch) range has bevelled edges rather than straight edges, a slightly steeper gradient, and a width of 900mm to 1105mm depending on height.

• The natural rubber smell fades after a couple of days. Wiping the surface with a damp cloth and washing-up liquid speeds this up.
• Pictures are for illustration only; the actual product may vary due to product improvements.