Folding Aluminium Motorbike Ramp for Steps & Low Load Heights – 1200mm or 1500mm L x 290mm W, 340kg

A lightweight folding aluminium loading ramp for getting motorbikes over steps and doorways or into vans and trailers with a low bed height. Use one ramp for a motorbike, or a pair for ATVs, quad bikes and ride-on lawnmowers. Each ramp is 290mm wide and rated to 340kg. The 1200mm ramp suits load heights of 290mm to 360mm, and the 1500mm ramp suits 380mm to 450mm.

• Made from aluminium and lightweight, at about 6kg per ramp.
• Folds to half its length for storage, clips shut so it will not open when stored, and has a built-on carry handle.
• Double support bar for extra strength and durability.
• Cut-out grip surface gives good grip and lets dirt drop through.
• The foot is angled to suit the load height, so it sits securely on the ground, gives a smooth entry onto the ramp and supports the weight of the load.
• The coated rest-on connection helps keep the ramp in place and protects your vehicle while loading.
• Supplied with a safety strap to secure the ramp during loading.
• No installation: unfold it, rest it on your van, step or trailer, strap it and start loading.
• Can be left outside.
• One-year warranty.

• Measure your load height: the vertical distance from the ground to where the ramp will rest. Use the ramp only within its stated range; using it above or below can reduce stability and capacity.
• These ramps are for lower heights than the average vehicle load height. For higher load heights, see our 2200mm loading ramp with double support bar.
• Minimum tyre width 100mm.
• Not suitable for single-axle or tracked machinery or vehicles, cars, caster wheels or solid wheels.
• For domestic use only; not designed for commercial or professional use. Professional loading ramps are available for that.