Folding Aluminium Ramp & Rubber Threshold Ramp Drive-In Kit – 2ft to 8ft Long, 12mm to 100mm High

A portable up-and-over kit that pairs a folding aluminium wheelchair ramp (2ft to 8ft long) with a rubber threshold ramp (12mm to 100mm high). Together they safely bridge doorways and thresholds, including awkward uPVC thresholds and spots where the floor height differs on each side of the door. Because nothing is fixed permanently, it supports independence and suits people who move home or travel often.

• To protect the doorframe from the weight of a wheelchair or scooter, choose a rubber ramp slightly higher than your threshold, so the folding ramp rests on the rubber ramp and bypasses the frame. Or place the rubber ramp inside and the folding ramp outside.
• You can also rest the folding ramp straight onto your threshold.
• No installation: just rest both ramps in position and start using them.
• The rubber ramp can often be left in place like a doormat, but the folding ramp has to be moved to close the door. For a set-up that can stay in place, see our adjustable threshold ramp with entry plate kit.

• Folds like a book for easy storage and transport, with a built-in carry handle.
• Lightweight, from 4.2kg depending on length, so it can be lifted into place when needed.
• Curved rest-on connection (70mm long) with rubber for extra grip between the step and the ramp.
• The curved design gives a smooth ride on and off the ramp.
• 30mm high safety edges help stop users rolling off.
• Anti-slip aluminium surface for extra grip.
• Usable width of 715mm.
• 2ft to 6ft ramps have a flat hinge; 7ft and 8ft ramps have a barrel hinge and a steeper entry onto the ramp.
• Independently tested to a capacity of 275kg to 300kg, suitable for wheelchairs, electric wheelchairs, mobility scooters and walkers.
• A carry bag is available for the 2ft to 5ft ramps.

• Smooth gradient for disabled access: ramps up to 80mm high give a 1 in 10 gradient, and ramps from 85mm give a 1 in 8 gradient.
• Durable rubber with a 1000kg capacity, suitable for manual and electric wheelchairs, scooters and walkers.
• 1000mm wide. You can trim the width with a Stanley knife, saw or similar. Changing the length is not recommended because it alters the gradient.
• Flat edges let you place several ramps side by side for a wider run.
• Weatherproof, for indoor and outdoor use, and can be left outside.
• Anti-slip surface for good traction.
• Made from a 100% recycled rubber compound. See our rubber threshold ramps for individual ramp sizes.
• The natural rubber smell fades after a couple of days in fresh air; wiping the surface with a damp cloth and washing-up liquid speeds this up.

• For higher thresholds, see our higher drive-in kit; rubber ramps in this range go up to 203mm high.
• One-year warranty.