4-Channel Heavy-Duty Cable Protector – 870mm L x 542mm W x 52mm H, 80mm Hose Channel, 5,000kg

A heavy-duty 4-channel cable protector that guards cables from both pedestrian and vehicle traffic. It is a popular choice in the events industry for covering sound, lighting and network cables and hoses, indoors and outdoors. It is rated at 5,000kg over 25 x 30cm and 10,000kg per axle.

• 4 channels: 1 channel 80mm x 36mm (for C-pressure hoses) and 3 channels 34mm x 36mm.
• Chequered, high-visibility non-slip surface for pedestrians and vehicles; the yellow polyurethane cover gives a strong warning effect and locks securely.
• Interlocking design: connect several units to cover your required cable length.
• Quick to set up: rest it on the floor, open the lid and lay in the cables. The self-cleaning lid locks securely when closed.
• Portable, with built-in carry handles; one person can lift and move it when needed.
• Designed for indoor and outdoor use and can be left outside.

• Made from non-breakable, 100% recyclable polyurethane, built for use in industrial areas.
• Resistant to oil, acid and petrol, and to short-term contact with solvents.
• Temperature resistant from -30°C to +60°C, with a shore A hardness of 88 ± 4.
• Smooth surfaces, edges and corners help prevent injuries, and the high-visibility design alerts pedestrians and drivers.
• Fire protection class B2 (DIN 4102) and class E to DIN EN 13501-1. TÜV SÜD certified.
• Protects low-voltage cables up to 500V, such as communication, control and power-supply cables, as well as water and sewage pipes and hoses. Not suitable for rigid gas pipes.
• Made in Germany. Five-year warranty.

• Easy to clean, even with a steam jet cleaner; little maintenance is needed thanks to the self-cleaning lid.
• Keep the hinge area and lid clean, and lightly lubricate the hinges and closure regularly with a silicone spray. Wipe off any excess afterwards to avoid a slip risk.

• Accessories are available to fit the run to your area, including curved sections and end caps.